Prosys OPC UA Monitor 1.7.0-55 Download

Release date: 2024-08-22

Here you will find the official distribution of the Prosys OPC UA Monitor application.

License Terms

Prosys OPC UA Monitor Server is a commercial application and requires a license to be purchased for continuous operation. It may be evaluated for 60 days to validate the feasibility for the installation in question. The application will run 120 minutes in Evaluation Mode, after which it will be stopped. The commercial license is required to let the application run intermittently.

You can order a license at https://www.prosysopc.com/products/opc-ua-monitor/purchase/.

Prosys OPC UA Monitor is covered by the license terms in Prosys_OPC_UA_Monitor_License.pdf.

Download

By downloading the Prosys OPC UA Monitor, you accept the license terms.

prosys-opc-ua-monitor-windows-x64-1.7.0-55.exe (Windows 10 or later, 64-bit) (1)
prosys-opc-ua-monitor-windows-x86-1.7.0-55.exe (Windows 10 or later, 32-bit) (1)
prosys-opc-ua-monitor-linux-x64-1.7.0-55.sh (Linux, x86-64, 64-bit) (2)
prosys-opc-ua-monitor-linux-aarch64-1.7.0-55.sh (Linux, ARM/Aarch64, 64-bit)
prosys-opc-ua-monitor-mac-x64-1.7.0-55.dmg (macOS, "Intel" x86-64, 64-bit)
prosys-opc-ua-monitor-mac-aarch64-1.7.0-55.dmg (macOS, M1/M2/ARM/Aarch64, 64-bit)
1 Should work also with Windows 7 and 8, but they are not officially supported nor tested.
2 Tested on Ubuntu 22.04 LTS, but the application should run on any standard Linux distribution.

Release Notes

See Release Notes for the changes in this version.

Installing

Windows

On Windows, run the installer executable prosys-opc-ua-monitor-windows-x64-1.7.0-55.exe and follow the instructions. By default, the application is installed to the folder Program Files/ProsysOPC/Prosys OPC UA Monitor.

Linux

The application requires a GUI (Linux Desktop Environment) in order to run.

On Linux, first open the terminal and navigate to the directory of the downloaded .sh file.

Then run the installation with the command

sudo sh prosys-opc-ua-monitor-linux-x64-1.7.0-55.sh

This will open the installer where you can follow the steps to complete the installation. By default, the application is installed to the folder opt/prosys-opc-ua-monitor.

macOS

On macOS, run the installer application and follow the instructions. By default, the application is installed to the folder /Applications.

Uninstallation

Windows

On Windows the application can be uninstalled through the Control Panel or the Apps & features menu, or optionally with the uninstaller that is located in the installation folder.

Linux

On Linux, open the terminal and navigate to the installation folder (default folder is opt/prosys-opc-ua-monitor) and use the command sudo ./uninstall.

macOS

On macOS you can just remove the application from the Applications folder.

Feedback

For additional queries and all feedback, please contact uamonitor-support@prosysopc.com.

2024-08-22